Dog Door Sliding Door Insert – Your pet does not have to stand in opposition thumbs to open a door; Therefore, they need to recruit your help every time they want to go outside or come back in. Install a pet door in your Dog Door Sliding Door Insert so your pet can move freely in and out of your home without notice.
Put the panel height adjustment knotted to the top of the pet door panel at the top of your Dog Door Sliding Door Insert. Push the door panel door onto the door door jamb and check if it fits tight against the frame without gaps. Remove the original sliding door latch from the door frame to get a flush fit if required.
Drill four 1/8 “holes through the top of the pet door panel to permanently install the plastic panels height adjustment to the top front and back of the pet door panel. Attach the pet door panel to your Dog Door Sliding Door Insert frame. Depending on the glass door manufacturer, choose from three different methods of fixed installation. Clean the front and back edges of your sliding door with an all-purpose cleaner.
Install shell and stick rubber strips against the front edge Dog Door Sliding Door Insert. Place the lock side of the pet door panel latch assembly against the edge of the pet door panel on the same side as the door opens. Place the other half of the latch on a sliding glass door next to the locking side of the unit. Turn the lock on the locking side of the device where it secures aside on the glass door. Mark the two screw holes on the door frame.